5
4.0 CONNECTING THE HARDWARE
Referring to the drawings below, connect the proper cables and then connect the AC
power adaptor.
Rear Panel Connectors:
The rear panel has the connectors required to interface the 1T-
VS-668 to the External Inputs, Outputs and Power Supply. The numbers above and below
the drawing relate to the connector directly above or below the number. Refer to the
corresponding number and functional description below.
1
IR IN:
Connect the supplied IR extender to receive the IR signal from the included
IR remote. Ensure that the remote is within the direct line-of-sight of the IR extender.
2
SERVICE:
Reserved for manufacturer use only.
3
RS-232:
Connect to a PC/Laptop or RS-232 control system to use RS-232
commands to control the device (See Section 6.5 for details on RS-232 commands).
4
OUTPUT
a)
HDMI 1/2:
Connect to an HDMI display or AV Receiver for video and/or
audio output.
b)
PC/HD:
Connect to a monitor/display for video output. For HD (component)
output, use the included D-Sub 15pin to 3 RCA adaptor cable for resolutions
from 480i-1080p.
NOTE: All three outputs will display the same selected signal at the chosen resolution. When the
selected HDMI input source signal has HDCP content the VGA/Component output will not display any
image.
c)
COAX:
Connect to an amplifier or active speakers for audio output in digital
format.
NOTE: When the input audio source signal is in bitstream format and the AUDIO SOURCE setting is
set to AUTO in the OSD menu, the coaxial output will bypass the input audio signal including
compatible surround sound formats.
d)
AUDIO
: Connect to an amplifier or active speakers for audio output in stereo
format.
5
INPUT
a)
HDMI 1/2/3:
Connect to HDMI sources such as Blu-ray/DVD player for both
video and audio signal conversion.
b)
PC 1/2/3:
Connect to a PC/Laptop source for video signal input with a D-Sub
15pin cable.
1 2 3 4c 4d 5c 6 7
4a 4b 5a 5b 5d 5e 8
