LCD Rack Mountable Monitor 29
• C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and display in red on
the Waveform.
• C Min
- Used to set the minimum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and display in red on
the Waveform.
• Y Picture Blink
- Used to set whether or not to blink pixels for
values exceeding Y MAX and Y MIN.
• C Picture Blink
- Used to set whether or not to blink pixels for
values exceeding C MAX and C MIN.
• Range Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in Waveform/Vectorscope.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN shall blink.
* In the case of RGB input, Range Error is not
supported.
* See section “7. Other Functions -> [7] Range
Error” for more information.
• Y Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen, and display in red on
the Waveform.
• Y Min
- Used to set the minimum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen, and display in red on
the Waveform.
[5] Waveform
5. Menu Operations
