LCD Rack Mountable Monitor 17
• [SDI IN-A/IN-B] (BNC)
- Signal input terminal for HD/SD SDI signal.
• [SDI OUT] (BNC)
- Signal output terminal for HD/SD SDI
signal.
• [HDMI](HDMI)
- Signal input terminal for HDMI signal.
• [CVBS] (BNC)
- Signal input terminal for Composite signal.
• REMOTE (RJ-45)
- Provides connection to control equipment for
external monitor control.
- Features can be changed in the REMOTE
section of OSD menu.
• RS-422 [IN/OUT] (RJ-45)
- This product supports Dynamic UMD
provided by TSL protocol.
• [USB]
- This terminal is used to upgrade the firmware
(USB Memory stick) or color calibration made
by TVLogic.
• [ETHERNET IN/OUT] (RJ-45)
- This terminal is used to control TVLogic
Monitor control program (Observer).
- Ethernet port for easy firmware updates and
remote control(Status Save&Load / LUT
Save&Load ).
• DC IN
- DC power input terminal for DC 12V.
< Warning >
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel.
And the connected devices such as camera
or video source player may also be influenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.
DC IN
socket
1: GND
4: +12V
1
2
3
4
MENU/EXIT
DOWN/UP/ENTER
TALLY
CVBS
F1
F2
F3
F4
HEADPHONE
SDI-A/B
HDMI
SCAN
ASPECT
MARKER
BLUE/MONO
POWER
SDI IN-A
HDMI IN
CVBS REMOTE
SDI IN-B
ETHERNET IN
ETHERNET OUT
RS-422 IN
RS-422 OUT
DC IN
USB
SDI OUT
RKM-290A : REAR
3. Controls & Functions
