LCD Rack Mountable Monitor 13
MENU/EXIT
DOWN/UP/ENTER
TALLY
CVBS
F1
F2
F3
F4
HEADPHONE
SDI-A/B
HDMI
SCAN
ASPECT
MARKER
BLUE/MONO
POWER
SDI IN-A
HDMI IN
CVBS REMOTE
SDI IN-B
ETHERNET IN
ETHERNET OUT
RS-422 IN
RS-422 OUT
DC IN
USB
SDI OUT
3. Controls & Functions
RKM-270A : FRONT
• [BLUE]/[MONO] Button/Lamp
- Activates in the order of [Off]-[Blue Only]-
[Mono]-[Off]
- Press the button to remove red and green
from the input signal and display the screen
only under a blue signal. Press the button
again to activate mono mode.
• [MENU] Button
- Used to activate the OSD menu.
- When the OSD menu is activated, press this
button to exit from the menu.
• [DOWN/UP/ENTER] Knob/Button
- Press the knob to select the main menu and
the sub menus.
- Used to move within the menu when the OSD
menu is activated and is also used to increase
or decrease the value of selected feature.
[UP/DOWN/ENTER] Knob
- When the OSD menu is deactivated, it will
activated in orde of : [Volume]-[Bright]-
[Contrast]-[Chroma]-[Aperture]. After the
function is actevated press [DOWN]/[UP]
button to adjust the values.
• [F1][F2][F3][F4] Button/Lamp
- User can set the desired funtions in Function
keys.
- Used to activate the [F1]~[F4] function.
• [AUDIO OUT] (Phonejack)
- Used for Stereo Audio Output through Phone
Jack. (video signals with embedded audio
only)
• [TALLY] Lamp
- Tally lamp that can be toggled in green or red
using the REMOTE(RJ-45) port or network.
• [SDI-A/B]Button/Lamp
- Used to select SDI-A / SDI-B input.
• [HDMI] Button/Lamp
- Used to select HDMI input.
• [CVBS] Button/Lamp
- Used to select CVBS input.
• [SCAN] Button/Lamp
- Used to change the scan mode.
- Press the button to activate through the scan
modes: [ZEROSCAN] -> [1:1 SCAN] -> [USER
ASPECT]
* [USER ASPECT]: User can adjust width and
height of the display.
* Check “7. Other Functions [1] User Aspect” for
more information.
• [ASPECT] Button/Lamp
- Used to change the various display ratio.
- Activates in order of [16:9]-[4:3]-[2.35:1]-
[1.85:1]-[15:9]-[16:10] -[AUTO]-[16:9].
• [MARKER] Button/Lamp
- Used to activate/deactivate the Marker.
- The type of marker at work can be selected
on the main menu.
• [POWER] Button
- Used to turn the power on and off of the
selected monitor among the monitor 1/2/3.
