Multi F
orma
t L
CD M
onit
or
8
Multi F
orma
t L
CD M
onit
or
8
Multi F
orma
t L
CD M
onit
or
9
REAR-KEY
Controls, Indicators and Connections
◦
[MENU/SOURCE] Button
- Press the button briefly to activate the main menu.
- Press the button for a long time to activate the Input Select menu. Use the Up and Down menu to
change the Input Select menu.
* See section “6. Other Functions [1] Input Signal” for more information.
◦
[DOWN] Button
- Used to move down within the menus during OSD menu activation and also to decrease the value
of the selected feature.
- If the main/sub menu is not activated, the feature selected in “SYSTEM-DOWN/F1” setting will be
activated.
- Use UP/DOWN keys to select and proceed through various functions.
◦
[UP] Button
- Used to move up within the menus during OSD menu activation and to increase the value of
the selected feature.
- If the main/sub menu is not activated, the feature selected in “SYSTEM- >UP/F2” setting will be
activated.
- Use UP/DOWN keys to select and proceed through various functions.
◦
[ENTER] Button
- Used to confirm a chosen value (or mode).
- If the main/sub menu is not activated, the feature BRIGHT->CONTRAST->CHROMA->APERTURE-
>VOLUME functions are gradually will be activated.
- Use UP/DOWN keys to select and proceed through various functions.
◦
[OPERATE] Lamp
- Indicates condition and power status of unit.
- Light turns off when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green LED light.
- Restores to previous state when monitor power turns off and comes back on.
◦
[POWER] Button
- Used to turn power on and off.
Controls, Indicators and Connections
REAR
◦
[RS422 IN/OUT] (RJ-45)
- Used to control the monitor with protocol provided by TVLogic or to support TSL protocol.
◦
[REMOTE] (RJ-45)
- Provides connection to control equipment for external monitor control.
- Features can be changed in the REMOTE(1/2) section of OSD menu.
◦
[RS232]
- Factory program port used for automatic alignment.
◦
[CVBS1/Y/G/S-Y] (BNC)
- Signal input terminal used to feed the monitor COMPOSITE 1, S-VIDEO Y, COMPONENT Y and RGB G
signals.
◦
[CVSBS2/Pb/B] (BNC)
- Signal input terminal used to feed the monitor COMPOSITE 2, RGB B and COMPONENT Pb signals.
◦
[CVSBS3/Pr/R/S-C] (BNC)
- Signal input terminal used to feed the monitor COMPOSITE 3, S-VIDEO C, COMPONENT Pr and RGB R
signals.
◦
[DVI-I] (DVI-I)
- Signal input terminal for DVI ANALOG or DVI DIGITAL signal.
◦
[HDMI(HDCP)] (HDMI)
- Signal input terminal for HDMI signal.
◦
[SDI-IN A] (BNC)
- HD/SD SDI signal input terminal for SDI A.
◦
[SDI-OUT A] (BNC)
- HD/SD-SDI signal output terminal for SDI A signal.
◦
[SDI-IN B] (BNC)
- HD/SD SDI signal input terminal for SDI B.
◦
[SDI-OUT B] (BNC)
- HD/SD SDI signal output terminal for SDI B signal.
◦
[Audio in & out] (PHONE JACK)
- Select the left/right Audio disembedded signal output or HDMI input signal or external stereo
signal is output through the phone jack.
