Multi F
orma
t L
CD M
onit
or
30
Multi F
orma
t L
CD M
onit
or
30
Multi F
orma
t L
CD M
onit
or
31
Menu Contents
[7] WAVEFORM
Below is the description for each function of the WAVEFORM menu.
◦
WAVEFORM/VECTOR
- Used to set the Waveform and Vectorscope.
- This feature is available in SDI, COMPOSITE 1/2/3, S-VIDEO and COMPONENT modes.
- Activates in order :
* Normal mode : OFF, WAVEFORM, VECTOR, YCbCr, RGB, W + V(WA VECTOR), WIDE-Y
* PBP mode : OFF, WAVEFORM, VECTOR, MODE 1(WA VECTORY), WIDE
- Displays on the bottom right of the screen and moves above the UMD, if UMD feature is selected.
* WAVEFORM : Displays the shape and form of luminance level of a signal.
* VECTOR : Displays color components B-Y and R-Y of the input signals on the XY axis. HD and SD
inputs are classified into two kinds, depending on the input. 100% and 75% scales indicated on a
display.
* Y/Cb/Cr : Displays each Waveform for elements of the luminance and Cb/Cr of the input signal.
* W+V : Displays Waveform and Vectorscope simultaneously.
* WIDE-Y : Displays stretched luminance components of the input signal to fit width of the screen
on the bottom of the monitor.
<WAVEFORM>
WAVE
FORM
<VECTOR>
<YCbCr/RGB>
VEC
TOR
Cr/B
Cb/G
Y/R
<WVECTOR>
WAVE
FORM
<WIDE-Y>
WAVEFORM
VEC
TOR
SDI A LVM-420A 1080/60i
PAGE I >> PAGE II
WAVEFORM/VECTOR OFF
WAVEFORM INTENSITY OFF
WAVEFORM TRANS OPAQUE
VECTOR GAIN x4 OFF
LINE WAVEFORM ENABLE OFF
LINE POSITION SELECT 0
LINE POSITION DRAW OFF
WAVEFORM COLOR WHITE
SDI A LVM-420A 1080/60i
PAGE II >> PAGE I
RANGE ERROR OFF
Y MAX MAX
Y MIN MIN
C MAX MAX
C MIN MIN
Y PICTURE BLINK OFF
C PICTURE BLINK OFF
Menu Contents
◦
WAVEFORM INTENSITY
- Controls the brightness of the WAVEFORM/VECTOR display.
- Available values are between 0 ~ 30. The higher the number the brighter the waveform will be.
◦
WAVEFORM TRANS
- Controls the transparency level of the WAVEFORM/VECTOR.
- Available values are OPAQUE and TRANS.
* If the option is set to OPAQUE, the main OSD will overlap with the waveform/vector. However,
it will automatically display it as transparent and goes back to opaque if the main OSD disappears.
◦
VECTOR GAIN x4
- Used to increase the value of the Vectorscope.
◦
LINE WAVEFORM ENABLE
- This item is utilized to display the entire data or one line data on the waveform.
◦
LINE POSITION SELECT
- In WAVEFORM / VECTOR SCOPE, use the Up/Down buttons to select User’s desired line.
◦
LINE POSITION DRAW
- ON/OFF the line indication for line select feature.
- Activates only when the LINE WAVEFORM ENABLE feature is enabled.
- When this item is set to OFF, the Line Waveform still displays if LINE WAVEFORM is enabled.
◦
WAVEFORM COLOR
- This item selects the color of Waveform/Vectorscope.
- Available options are White and Green.
Position changes if the value changes
in LINE SELECT option and the waveform
of the selected position displays.
WAVEFORM/VECTOR : WAVEFORM
LINE POSITION SELECT : ON
LINE POSITION DRAW : ON
WAVE
FORM
