Multi F
orma
t L
CD M
onit
or
36
Multi F
orma
t L
CD M
onit
or
36
Multi F
orma
t L
CD M
onit
or
37
Menu Contents
◦
OSD POSITION
- Controls the OSD position.
-
Available positions are Center, Top-Left(L-T), Bottom-Left(L-B), Top-Right(T-R) and Bottom-Right(R-B).
◦
INTERNAL PATTERN
- This item generates internal white pattern. The white level select between 0% and 100% (Per 5%
increase or decrease).
◦
SET DEFAULT
- User can use the SET DEFAULTS.
- Feature to initialize the values to 0 of BRIGHT, CONTRAST, PHASE, CHROMA, APERTURE and NOISE
REDUCTION of the monitor.
◦
SIGNAL LOCK
- Signal Lock selects the video output by using input signal synchronization.
- ENABLE : This function outputs the video using input singal synchronization.
- DISABLE : This function outputs the video using self-created synchronization.
When the input singal or input format are changed, the monitor will response quickly.
◦
KEY LED
- Controls key LED On/Off.
- If the button with LED is pressed with the KEY LED Off, LED comes on but goes off after 5 seconds later.
◦
F1/DOWN MAPPING
- User can select the function for F1/DOWN button.
- Selectable functions : BRIGHT, CONTRAST, VOLUME FREEZE, WAVEFORM, TIMECODE, CC SEL,
ALM SEL, OUTPUT MODE, FAST MODE, DITHERING, FILTER, FORCE psf, UMD.
◦
F2/UP MAPPING
- User can select the function for F2/UP button.
- Selectable functions : BRIGHT, CONTRAST, VOLUME FREEZE, WAVEFORM, TIMECODE, CC SEL,
ALM SEL, OUTPUT MODE, FAST MODE, DITHERING, FILTER, FORCE psf, UMD.
◦
KEY LOCK
- This item locks all buttons except power, input select, and menu buttons.
◦
INFOMATION
- Board version and current status information.
Other Functions
[1] INPUT SIGNAL
◦
This product is capable of processing all input signals usable.
◦
TheInput settings are as follows:
1. Press the MENU button and activate the menu below :
2. Use [UP]/[DOWN] buttons to to select desired input source, then enter to confirm.
3. Input signal resolution displays on the bottom of OSD menu.
4. Press ANALOG button again to remove the OSD menu from display.
5. Menu will be disappeared when time set is over from the screen.
PBP MODE
SDI-A
SDI-B
COMPOSITE 1
COMPOSITE 2
COMPOSITE 3
S-VIDEO
COMPONENT
RGB
DVI ANALOG
DVI DIGITAL
HDMI
NO VIDEO
