background image

host product manufacturer is responsible for compliance to any other FCC rules 

that apply to the host not covered by the modular transmitter grant of certification. 

The final host product still requires Part 15 Sub part B compliance testing with the 

modular transmitter installed. 

The end user manual shall include all required regulatory information/warning as 

shown in this manual, including: This product must be installed and operated with a 

minimum distance of 20 cm between the radiator and user body. This device have 

got a FCC ID: 2ANDL-WBR3S. The final end product must be labeled in area with the 

following: “Contains 

Transmitter Module FCC ID: 2ANDL-WBR3S

 

This device is intended only for OEM integrators under the following conditions: 

 

The antenna must be installed such that 20cm is maintained between the antenna and 

users, and 2) The transmitter module may not be co-located with any 

other transmitter or antenna. As long as 2 conditions above are met, further transmitter 

test will not be required. However, the OEM integrator is still responsible for 

testing their end-product for any additional compliance requirements required with 

this module installed 

Declaration of Conformity European notice 

 

 

Hereby, Hangzhou Tuya Information Technology Co., Ltd declares that this module 

product is in compliance with essential requirements and other relevant provisions 

22 / 23 

9 APPENDIX-STATEMENT 

 

of Directive 2014/53/EU,2011/65/EU. A copy of the Declaration of conformity can be 

found at

 https://www.tuya.com.

 

 

This product must not be disposed of as normal household waste, in accordance 

Summary of Contents for WBR3S










Reviews: