en
17
Installation
Indications,
functions and options
Messages
Commissioning
Operation and function
7. Flush?
Î
Activate the flushing option, if necessary.
The flushing option is used for venting the heating el-
ement.
If the flushing option is activated, the loading pump
switches on at 100 % for 1 min. The remaining flushing
time is indicated as a countdown.
The flushing process can be stopped by means of the
escape button (
⟲
) at any time.
8. Completing the commissioning menu:
Lastly
a security enquiry will appear. If the security en-
quiry is confirmed, the adjustments will be saved.
Î
In order to confirm the security enquiry, press the
right button (
✓
).
Î
In order to reenter the commissioning menu
channels, press the left button (
⟲
). If the secu-
rity enquiry has been confirmed, the controller is
ready for operation and should enable an opti-
mum system operation.
Note
The adjustments carried out during commissioning can be changed any-
time in the corresponding adjustment channel. Additional functions and
options can also be activated and adjusted.
Set the code to the customer code before handing over the con-
troller to the customer (see page 28).
4.4
Main menu
In this menu, different menu areas can be selected.
The following menus are available:
• Status
• Controller
• Measuring unit
• Optional functions
• Basic settings
• SD card
• Manual mode
• User code
Î
Select the menu area by turning the Lightwheel
®
.
Î
Press the right button (
✓
) in order to enter the selected menu area.
If no button is pressed for 1 min, the display illumination switches off. After 3 more
minutes, the controller switches to the Status menu.
Î
In order to get from the Status menu into the Main menu, press the left button
(
⟲
)!
Summary of Contents for tubra-eTherm
Page 123: ...27 fr...
