Page 7
Power supply specifications
Environment operating conditions
Input
parameters
Voltage range
Frequency
Current
Output
parameters
Voltage
Current
Operating
conditions
(100-240)
50/60
0,5
Operating
conditions
12
2
Units
Volts
Hertz
Ampers
Units
DC Volts
Ampers
It is recommended to use a UPS instead of stabilizers,
since the former has two functions: it stabilizes and
provides a continual power source during energy cutoff.
Environmental
conditions
Altitude
Operation temperature
Relative Humidity
Installation/overvoltage
Degree of contamination
Storage temperature
Voltage
Functional
conditions
3500 (máx.)
10-30
30-80
Category II
2
10-30
12
Units
Meters
ºC
%
ºC
DC Volts
Safety information
STEAM
with 3hs. at 60 ºC program
STEAM
with 1 h. at 60 ºC program
STEAM
with 30 min. at 60 ºC program
STEAM
with 20 min at 60 ºC program.
VH2O2
with 2 hs. at 60 °C program
VH2O2
with 30 min at 60 ºC program.
-Check that culture medium completely wets the
spore carrier.
-Do not remove the BI until the equipment reports
the final readout result, check the impresion of the
ticket.
To avoid the risk of injury, because of glass
fragments generated after the glass ampoule
inside the BI tube is crushed:
-Cool the BI during the indicated time before
crushing the ampoule.
-Do not handle the BI excessively since this might
cause the glass ampoule to burst.
-Wear safety glasses and gloves when removing
the BI from the sterilizer.
-Wear safety protective glasses and gloves to crush
the ampoule and to press the cap of BI.
To avoid a potencially hazardous situation:
Avoid contact with the hot surface of the metal
incubator block.
To avoid BIs from absorbing fluorescent
residues:
Avoid BIs direct contact with chemical
indicators or tapes.
Do not use this product in a manner not specified
in this manual, otherwise the protection provided
by the product might be affected.
Do not replace the power supply cord for other not
provided within the product.
Only qualified personnel can access the inside
of the incubator and its components. Parts or
components inside the machine should not be
manipulated by the user.
Serial/Batch Number
For easy identification, each auto-reader has a unique serial
number and a batch number printed on a label found at
the bottom of the auto-reader and on its packaging. Please,
register your serial number and batch number in this manual
for future reference:
Serial number:
Batch number: