Page 71
Attention
:
Selecting a program is possible only when the door is open.
2.
Verify that you chose the required cycle.
3.
If the autoclave is equipped with a printer verify that a paper roll is
inserted in the printer. If not - insert as per para. 5.2.
10.6
Closing and locking the door
In order to close the door, follow the following steps:
When the door is open, the screen below will be displayed:
1.
Close the door:
Warning!
In order to close and lock the door push the door to the wall of
the autoclave chamber (for about 10 seconds) until the "System
Ready" message appears as shown below!
While the door is locking the following screen will be displayed:
