Page 61
7.2.3
Treating the thermal papers:
•
Store the papers in a dry, cool and dark place.
•
Do not rub the papers with hard substance.
•
Keep the papers away from organic solvent.
Cautions!
Never disassemble the printer. Failure to follow this instruction
may cause overheating or burning of the printer or the AC
adapter. Or an electric shock, which may lead to fires or
accidents.
Never use the printer in a place of extreme humidity or any place
where it can possibly be splashed by any liquids. If any liquids get
into the printer, it could lead to fire, electric shock, or other
serious accidents.
Never touch the thermal head immediately after printing because
it becomes very hot. Make sure that the thermal head is cool
before setting papers or cleaning the thermal head.
Power OFF the printer in any of the following cases:
•
The printer does not recover from an error.
•
Smoke, strange noise or smells erupt from the printer.
•
A piece of metal or any liquid touches the internal parts or slot of the
printer.
7.3
Filling the Water Reservoir
Remove the water reservoir cover. Pour distilled water into the
reservoir through the opening on top of the autoclave until it reaches
the base of the safety valve holder. The water quantity is approx. 7.1
liters (1.56 US gal.).
Use only water having the characteristics as per table in para. 2.13.
Tap water may clog the system. A clogged system causes increase of
pressure, which prevent temperature from rising.