Page 2
5.5
Program 5: Liquid A – Cooling (C – cooling models only) 38
5.6
Program 6: Liquid B – Waste Cooling (C – cooling models only) 40
5.7
Program 7: Bio Hazard 1 (BH, bio-hazard models only) 41
5.8
Program 8: Bio Hazard 2 (BH, bio-hazard models only) 43
5.9
Program 9: Bio Hazard Liquids (BH, bio-hazard models only) 44
5.10
Program 10: Vacuum Test (PV, pre-vacuum models only) 45
5.11
Program 11: Warm-Up 46
5.12
Program 12: Isothermal 47
5.13
Program 13: Air Mixture 48
5.14
Program 14: Glass Test 49
5.15
Program 15: Durham 51
6.
Screens 53
6.1
Screens following a completely successful cycle – "Cycle Ended" 53
6.2
Screens following aborted cycles after complete sterilization stage 53
6.3
Screens following a fail cycle: 54
7.
Printer 56
7.1
Printer Output 56
7.2
Printer Handling 59
7.3
Filling the Water Reservoir 61
7.4
Condense collecting tray 62
8.
Installation 63
8.1
Placing 63
8.2
Lifting and carrying 64
9.
Preparation before Sterilization 65
9.1
Instruments 65
9.2
Wrapped Instruments 66
9.3
Packs 67
9.4
Tubing 68
9.5
Liquids 68
10.
Operating Instructions 69
10.1
Turning on the autoclave 69
10.2
Opening the door 69
10.3
Safety 70
10.4
Loading 70
10.5
Operation 70
10.6
Closing and locking the door 71
10.7
Starting cycle 72
10.8
Unloading 73
10.9
Stopping the process and cancelling the ERROR message 74
10.10
Unloading 74
10.11
Cycle by Clock mode 75
