Page 38 of 75 Pages
Set the required value, move to
Set
and press
UP
or
DOWN
keys to confirm the parameter value.
In order to exit move the cursor to
Exit
and press
UP
or
DOWN
keys
7.4.7.2
Multiple Cycles
Repeat the action mention in 6.2.7.1
End Temperature
7.4.7.3
Multiple Cycles Gap
Repeat the action mention in 6.2.7.1
End Temperature
7.5
System Parameters
This directory includes three subdirectories
The following screen will be displayed when entering
SYSTEM
PARAMETERS
directory:
1.
In order to enter to the sub directories move the cursor by pressing
UP
or
DOWN
keys to the required item and press
START/STOP
key
2.
In order to exit this screen follows one of the next:
Move the cursor to
Exit
with the
UP
or
DOWN
keys and
select it by pressing the
START/STOP
key.
Press the
UP
and
DOWN
keys simultaneously.
7.5.1
Print Rate All
This subdirectory enables to change the printing rate during the
whole cycle except sterilization stage
Summary of Contents for 3840 ELVG-D
Page 2: ......
Page 17: ...Page 15 of 75 Pages OVERALL DIMENSIONS DRAWING mm...
