Tuttnauer 1730EK, Technical Manual

Page: 21 / 111

www.shanghaidelan.com
19
8.2.10 Water Time – Time for entering water to the autoclave
This value defines the entry time of the water to the autoclave to
locate the electrode touching the water.
This time will change from process to process and even for
different autoclaves.
When the autoclave is vertical and the defined time is Ø
seconds, the water valve will not open at all.
Entry Code – 11
Resolution – 1 second
Minimum Value – 1 second
Maximum Value – 90 seconds
Cycle 1 2 3 4 5
1730 50 50 50 50 50
2340
2540
30 30 30 30 30
3140
40 40 40 40 40
3850 45 45 45 45 45
Set value
Value
per
model
3870 60 60 60 60 60
8.2.11 LimitP add – The allowable addition to the maximum
pressure in every process
If the maximum pressure is 225kpa, the system will not heat
beyond this pressure. If LimitP add will be Ø, the maximum
pressure will remain 225kpa. If LimitP add equals 10, the
maximum pressure will be 235kpa.
Entry Code – 11
Resolution – 1kpa
Minimum Value – Økpa
Maximum Value – 30kpa
Cycle
1 2 3 4 5
Set value
Value 0 0 0 0 0
8.2.12 EA Type – The autoclave contains a drying pump for the Dry
Stage
Access Code – 33
Resolution – 1
Value – 0 or 1
Autoclave contains Drying Pump = 1
Autoclave does not contain a Drying Pump = 0
Cycle 1 2 3 4 5
E, EK 0 0 0 0 0
Set value Value
per
model
EA, EKA 1 0 0 0 0