TUTA-B12 GSM REMOTE CAMERA USER MANUAL
18
3.8 Emergency alarms
User can press the remote control emergency button t
o
make the camera alarm
.
The TUTA camera will stop any current operation once it receives an emergency alarm
signal and start to process emergency alarm. The TUTA camera will dial the
master
number 3 times until someone answers. If, after 3 attempts, there is no answer, the TUTA
camera will automatically stop dialing and revert to its preset mode. The
Master
can listen
in the live audio to answer the call.
3.9 Wireless sensor(s)
Standard 433MHz wireless sensors, such as infrared body sensors, wireless door magnet
sensors, wireless smoke detector etc. can be set as an alarm sensor of the camera. Up to
15 wireless sensors and wireless panic buttons can be loaded onto one TUTA camera.
There are two modes for wireless sensor:
Arming alarm mode:
the sensor will only alarm when the camera in its armed mode.
Normally door sensors and infrared sensors work with this mode.
Always alarm mode:
the sensor will always alarm once the sensor triggered even the
camera is in its disarmed mode. Normally smoke detectors, gas detectors and panic
buttons will work with this mode.
3.9.1 Loading sensor to camera
1. Power on the wireless sensor.
2. The
Master
or
family
user sends following SMS message to
make TUTA camera
enter loading mode:
Arming-alarm mode:
#05#
SensorDescription
#
(20)
Always-alarm mode:
#196#
SensorDescription
#
(21)
SensorDescription
is used for identify different sensors affiliated with each
camera. It can be numbers and letters.
SensorDescription
could be empty. For #05#, TUTA camera will recognize the
sensors with name Sensor and number such as: Sensor1, Sensor2, Sensor3. For
#196#, the TUTA camera will recognize the sensors with name SOS and number
such as SOS1, SOS2, SOS3.
Up to 9 characters can be include in the
SensorDescription
The default for a sensor alarm is to only send an SMS. If the user wants the
camera to send SMS & MMS of this sensor alarm, add an * in front of sensor
description, such as #05#*door#.
3. When the TUTA camera receives the SMS command, it will emit a BEEP tone and the
indicator will flash red and green alternately. The TUTA camera will then send a
notification SMS to the user: Camera pairing sensor, activate sensor then wait for
