TUTA-B12 GSM REMOTE CAMERA USER MANUAL
14
The maximum digits that are allows for the phone number is sixteen.
The TUTA camera will reply to the user after it receives the SMS command.
Note:
The # symbol must be included when typing an SMS command.
No spaces allowed within the commands.
3.2 Setup master number
The Master user has all the rights of changing the camera
’s settings and receives alarm
messages from camera. In order to enable all the functions on the camera, the
Master
user must store his/her mobile number in the camera
’s memory. Only one
Master
’s mobile
number (
Master
number) is allowed for a camera.
3.2.1 Add a master number to the camera
The user must edit and send the following SMS (text message) to camera from a mobile
phone (the phone number will be the Master number) to:
Setup master number:
#00#
PhoneNumber
#
(1)
The
PhoneNumber
is the camera installed SIM card
’s phone number. In the US, the area
code + number is sufficient. Ex: #00#9045551234#
If it is necessary to add a country code in front of the phone number, for example
#00#+49123456789# (+49 is the country code of Germany, 123456789 is
SIM’s phone number).
If the camera reply master number already exists, please refer the Reset Factory Setting
section of the manual to delete old master number.
3.2.2 Change the master number
Master
user sends following SMS message in order to:
Change
the master user’s number:
#14#
NewMasterNumber
#
(2)
3.2.3 Change password
In order to ensure your privacy and safety during the use of this camera, change the
password once start to use the TUTA camera.
Master
user sends following SMS message to:
Change the password:
#04#
oldpassword
#
newpassword
#
(3)
The
password
is a four digit number.
The original
password
is 1234.
