TUTA-B12 GSM REMOTE CAMERA USER MANUAL
16
commands to the camera as follow.
Set MMS center:
#124#
MMScenter
#
(9)
Set APN parameters:
#125#
Proxy IP
#
WAPProxyPort
#
HTTPProxyPort
#APN#
Username
#
Pssaword
#
(10)
Check the current operative network parameter settings:
#55#
(11)
The
MMScenter
should be the MMS center address of GSM provider.
For example: #124#http://mmsc.monternet.com#
#125#10.0.0.172#9201#80#cmwap#wap#wap#
3.6 Capturing images
Authority:
Master/ family /
guest
can send an SMS to the camera to get the MMS image or to send
the image(s) to an appointed mobile.
Master/ family
member can just call the camera to get the images.
Method 1:
A
Master
or
family
user calls the camera and hangs up upon hearing the ringing
tone (within 10 seconds).
The TUTA camera will reply SMS notification: Request received, TUTA camera is
sending an MMS image.
The user will then receive the MMS message in a few moments.
The
guest
users are unable to capture an image by using method 1.
Method 2:
The user sends following SMS message in order to:
Capture one image and send to the user mobile:
For master and family users:
#03#
(12)
For guest users:
#03#
password
#
(13)
Capture several images and send to the user mobile:
For master and family users:
#03#
ImageQuantity
#
(14)
For guest users:
#03#
Password
#
ImageQuantity
#
(15)
The
Image quantity
should be in the range of 1-8 when the image size is set at
160×128 or 320×240 (Refer image size setting elsewhere in the manual.) The
default image size is 320×240(QVGA).
The
Image quantity
should be in the range of 1-
2 when the image size is set at 640×480.
