TUTA-B12 GSM REMOTE CAMERA USER MANUAL
15
3.3 Define family user
Family
users have the authority to listen in on the camera, receive images, load the
sensors and remote controls to the camera, and receive notification when the motion
detector activated. The
family
use
r’s mobile numbers are set by the
Master
user. The
family
users should remember and safeguard the camera
’s phone number.
3.3.1 Add a family number
The
Master
user can send following SMS message in order to:
Add a family number:
#06#
FamilyNumber
#
(4)
Add several family numbers:
#06#
FamilyNumber
#...#
FamilyNumber
#
(5)
Up to 10
family
users’ number can be stored on one camera.
3.3.2 Delete family number
The
Master
user can send following SMS message in order to:
Delete a family number:
#113#
FamilyNumber
#
(6)
Delete several family numbers simultaneously:
#113#
FamilyNumber
#…#
FamilyNumber
#
(7)
Delete all family numbers:
#113#
(8)
3.4 Define guest user
Any selected person can operate in the
Guest
category if they know the password and the
unit’s phone number. The
Guest
user(s) can then use their mobile phones to send a SMS
command including password to the TUTA camera in order to obtain an MMS image.
3.5 MMS parameter settings
Normally the camera will preset local operator MMS settings in the firmware when it first
starts up, so that the user does not need to setup the MMS parameters. But if the GSM
operator changes the MMS parameters or a local setting does not preset in the firmware,
the user will receive SMS when they request MMS images: Sorry, the network is busy,
MMS sending failed. The
Master
number can setup the MMS parameters manually by
following method.
Six MMS parameters be set on the camera. The
Master
user should send two SMS
