TUTA-B12 GSM REMOTE CAMERA USER MANUAL
10
Chapter 2
Installation and power on/off
2.1 Installing the SIM card
Remove the rubber cover from the left side of the camera.
Open the SIM/USIM card slot by pressing the small dot beside the card slot with
the tip of a pencil, and pop open the slot.
Insert the card into the slot.
Push the slot back into place.
Put the rubber cover back in its place.
2.2
Extending the camera’s base board
Hold the base of the camera and
pull the top part and the bottom part
(base) in opposite directions (i.e.
away from each other).
Then the slot buckle will be pulling
open.
The head of the camera can now be
moved freely and located at any
direction.
