Page 36
1.5.2 FREEDIVING Mode SETTINGS
Default:
1minute (THD1)/ 3 minutes
(THD2)/ 5 minutes (THD3).
Setup range:
0minute – 60 minutes
If you set the FSI-ALM on, when you
reach the preset time, alarm warning will
activate:
one long beeping repeated two
times with vibration and time blinking.
FREEDIVING Mode – LOG START (Log
Start at Depth) Settings
●
To Access:
Under FREEDIVING
Preview Mode, press UP button Or
from SETTINGS, press UP/ DOWN
button; until the cursor aligns wi
th LOG
START. Press MODE button once.
One of
the LOG START options will be
blinking at the bottom. P
ress UP/ DOWN
button to select other options as needed.
Press MODE button to accept your
selection.
Default:
1.0 m (3.3 ft.)
Setup range:
1.0 m (3.3 ft.), 1.5 m (4.9 ft.), 2.0 m (6.5
ft.), 2.5 m (8.2 ft.), 3.0 m (9.48 ft.)
Note:
This setting will automatically apply to
SCUBA Mode and GAUGE Mode.
EXIT
●
To Access:
Locate the cursor at EXIT
and then press MODE button to
resume WATCH screen.
