Page 34
1.5.2 FREEDIVING Mode SETTINGS
FREEDIVING Mode – FSI – ALM
(FREEDIVING Surface Interval Alarm)
Settings – ON/OFF
●
To Access:
Under FREEDIVING
Preview Mode, press UP button Or
from SETTINGS, press UP/ DOWN
button; until the cursor aligns wi
th FSI-
ALM. Press MODE button once.
One of the
FSI-ALM o
ptions will be
blinking at the bottom. Press UP/ DOWN
Button to select other options as needed.
Press MODE button to accept your
selection.
Default:
ON
Setup range:
ON / OFF
FREEDIVING Mode – FTIME – THD
(FREEDIVING Time Alarm) Settings
●
To Access:
Under FREEDIVING
Preview Mode, press UP button Or
from SETTINGS, press UP/ DOWN
button; until the cursor aligns wi
th
FTIME-THD1/2/3. Press MODE button
once.
One of the FTIME-THD1/2/3 options will
be blinking at the bottom. Press UP/
DOWN button to select other options as
needed. Press MODE button to accept
your selection.
3 different settings are available (FTIME-
THD1~FTIME-THD3)
Default:
30 seconds (THD1), 60 seconds
(THD2), 90 seconds (THD3).
Setup range: 0 seconds – 360 seconds
If you set the FTIME-ALM on, when you
reach the preset time, alarm warning will
activate: one long beeping repeated three
times with vibration and time blinking.
