Page 35
1.5.2 FREEDIVING Mode SETTINGS
FREEDIVING Mode – FDPTH – THD
(FREEDIVING Depth Alarm) Settings
●
To Access:
Under FREEDIVING
Preview Mode, press UP button Or
from SETTINGS, press UP/ DOWN
button; until the cursor aligns wi
th
FDPTH-THD1/2/3. Press MODE button
once.
One of the
FDPTH-THD1/2/3 op
tions will
be blinking at the bottom. Press UP/
DOWN button to select other options as
needed. Press MODE button to accept
your selection.
3 different settings are available (
FDPTH-
THD
1~FDPTH-THD
3)
Default:
10m (32 ft.) (THD1)/20m (65 ft.)
(THD2)/30m (98 ft.)(THD3)
Setup range:
0m (0 ft.) – 99m (325 ft.)
If you set the FDPTH-ALM on, when you
reach the preset depth,
alarm warning will
activate: one long beeping repeated two
times with vibration and depth value
blinking.
FREEDIVING Mode – FSI – THD
(FREEDIVING Surface Interval Alarm)
Settings
●
To Access:
Under FREEDIVING
Preview Mode, press UP button Or
from SETTINGS, press UP/ DOWN
button; until the cursor aligns wi
th FSI-
THD1/2/3. Press MODE button once.
One of the
FSI-THD1/2/3 op
tions will be
blinking at the bottom. Press UP/ DOWN
button to select other options as needed.
Press MODE button to accept your
selection.
3 different settings are available (FSI-
THD1~FSI-THD3)
