Page 25
1.4.2 SCUBA Mode SETTINGS
WARNING:
Please make sure you have measured
the EANx gas of the cylinder you are
about to dive with and correctly input
that value in your computer. Before
using NITROX, you MUST have
received proper training and a
certification that qualifies you to use
such gas. Diving with Oxygen enriched
mixes carries an additional layer of
risk.
SCUBA Mode – PO2 Setting
●
To Access:
Under SCUBA Preview
Mode, press UP button Or from
SETTINGS, press UP/ DOWN Button to
locate the cursor at
PO2
and then
press MODE button to select.
The PO2 value at the bottom of the
screen will start blinking. Switch the
option with UP/ DOWN Button, once the
desired PO2 option appears, select it by
pressing MODE button once to accept
the value.
Default:
1.4
Setup range:
1.2 – 1.6
WARNING:
Before changing PO2 value, you must
understand related risk of adjusting it.
SCUBA Mode – SF (Safety Factor)
Settings
●
To Access:
Under SCUBA Preview
Mode, press UP button Or from
SETTINGS, press U
P/ DOWN Button to
locate the cursor at
SF and th
en press
MODE button to select.
SF value at the bottom of the screen will
start blinking. Switch the option with the
UP/ DOWN button once the desired SF
option appears select it by pressing the
MODE button once to accept the value.
