Tusa Element II, Owner'S Manual

Page: 102 / 116

102
Battery Hatch Removal
• Locate the Battery Compartment on the back of the
Module.
• While applying steady inward pressure on the center of
the Battery Hatch, rotate the Hatch Retaining Ring 10
degrees clockwise using a flat blade screwdriver (Fig.
101) or a Battery Hatch Tool.
• Lift the Hatch Ring up and away from the Housing, or turn
the Module over to allow it to drop out into your hand.
• Remove the Battery Hatch.
Battery Removal
• Remove the Retaining Bar located across the lower portion
of the Battery (Fig. 102a).
• Remove the Hatch O-ring. DO NOT use tools
• Using care not to damage the Battery Contacts (Fig.
102b/c), slide the Battery up and out of the Battery
Compartment.
Inspection
• Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
• Inspect the Button, Lens, and Housing to ensure they are
not cracked or damaged.
Fig. 101 - RING REMOVAL
Fig. 102 - HATCH REMOVAL
a
b
c