Tusa Element II, Owner'S Manual

Page: 89 / 116

89
M A
S
M A
S
Once the CDT has been Set and Started (by selecting ON), it
will continue to run in the background while on the surface until
turned OFF (stopped) or the Time reaches 0:00 at which time the
Alarm will strike, the graphic CDT will be displayed, and the
Timer will revert to OFF.
When a set Countdown Time reaches 0:00, the Audible Alarm
will sound during which the graphic CDT will flash (Fig. 85).
Upon descending to 5 FT/1.5 M (i.e., entry into Free Dive
mode), CDT operation will continue, if in progress.
During a dive, the CDT can be turned OFF (stopped) and ON
(started), but not Set.
Set Free CDT
Upon access, the Set CDT screen displays the graphics CDT and
SEt and the CDT (min:sec) with clock icon, the Minute Set Point
flashing (Fig. 86).
• Depressing the S button will scroll upward through the
Minute Set Points in 1 minute increments at a rate of 8 per
second.
• Pressing and releasing the S button momentarily and
repeatedly (< 2 sec each time) will step upward through the
Set Points one at a time.
Fig. 85 - CDT ALARM
(during audible)
Fig. 86 - SET CDT