90
M
A
S
M
A
S
• Pressing and releasing the A button momentarily (< 2 sec)
will save the Minute Set Point and the Seconds digits will
flash.
• Depressing the S button will scroll upward through the
Seconds Set Points in 1 second increments at a rate of 8
per second.
• Pressing and releasing the A button momentarily (< 2 sec)
will save the Seconds Set Point and revert to the CDT Status
screen with the graphic OFF (flashing) in place of the
graphic SEt (Fig. 87).
• Pressing and releasing the S button momentarily (< 2 sec)
will toggle from OFF to ON and Start the Timer.
• Depressing the M button for 2 seconds, or if no button is
pressed during a period of 2 minutes, operation will revert
to the Free Surface Main screen.
FREE DIVE EDT (ELAPSED DIVE TIME) ALARM
The Free EDT Alarm is factory set for 30 seconds. When set
ON, the Alarm will sound 3 short beeps and the graphic EDT
and Time digits will flash every 30 seconds (Fig. 88).
• Depress the A and S buttons simultaneously for 2 seconds,
while the Free Surface Main screen is displayed, to access
Set Free EDT Alarm.
Fig. 87 - CDT SET
(ready to start)
Fig. 88 - FREE EDT ALARM
(during dives)
Summary of Contents for Element II
