7
[OPTION]
Emergency batteries Code: APSM2Plus/P (panel shape version only)
Two emergency batteries, included inside the Lower Connection Module, switch in automatically and allow the
independent operation in the event of mains power down. Typical operating time in battery mode is 30 minutes (time
varying with the presence of accessories and options). The batteries recharge automatically when the metal detector is
connected to the AC power supply and switched on. Recharge time is about 8 hours. The module provides an audible ‘flat
battery’ signal activated when the battery charge goes below the operational limit of the device (signal endurance: about
12 hours).
[OPTION]
Web Server and Logger
Code: APSIM2Plus/P or APSIM3Plus/P (panel shape version); APSIM2Plus/E or APSIM3Plus/E (column shape version).
This module provides the following additional functions:
-
Built-in 10/100 base T Ethernet LAN interface
-
Web server for set-up and remote data log
-
Real/Time clock with battery backup
-
Non-volatile Memory for Metal Detector events storage.
-
wireless Wi-Fi interface (APSIM3Plus version only)
-
support of NetID system (APSIM3Plus version only)
[ACCESSORY]
Long Life Crossbar Battery Back-Up
(panel-shape version only)
Code: 55681. This Battery Pack (
BC
in the figure) can be attached to the crossbar of the archway. Two 9Ah batteries switch in
automatically and allow the independent operation in the event of mains power down. Typical operating time in battery mode is 9
hours (time varying with the presence of accessories and options). The batteries recharge automatically when the metal detector
is connected to the AC power supply and switched on. The battery charger is included in the Lower Connection Module and
provides an audible ‘flat battery’ signal activated when the battery charge goes below the operational limit of the device (signal
duration: about 12 hours).
REMARK: this option is not available for the Weather Resistant and Water Proof configurations.
BC
303-670-1099
