4
In case of damage to the Power Supply Unit, input and output cables
included, the unit should be returned to qualified Technical Assistance
Centre or directly to
Turnstiles.us
for proper repair or replacement. Do
not open, tamper with or attempt to repair the power supply unit or any
other part of the device.
If the device is stored for a long period in temperatures outside the
operating range, wait for the temperature of the detector to come back
within that range before switching on
Whenever there is any suggestion that the level of protection has been
reduced, the device should be taken out of service and secured against
any possibility of unintentional use, and authorised service technicians
should be called.
The level of protection is considered to have been reduced when:
- the device shows visible signs of deterioration;
- the device does not operate correctly;
- the device has been stored for a long period in sub-optimal
conditions;
- the device has suffered mechanical or electrical stress (shocks,
bumps, etc..);
- the device has suffered severe stress during transport;
- the inside of the device has come into contact with liquids.
Always remove the plug by hand when disconnecting the power supply
cable, never by pulling on the cable.
The standard power-supply adapter is not waterproof: place it in a
ventilated position where it is protected from water (rain, condensation,
liquid detergents)! There is a risk of electric shocks for people and
damage to the equipment.
This device contains electrical and electronic components, and may
therefore be susceptible to fire. Do not install in explosive atmosphere
or in contact with inflammable material. Do not use water or foam in the
case of fire when the device is powered up.
Do not use in an explosive atmosphere. Avoid contact with inflammable
or explosive material!
Models with protection covers: make sure that a switch or other device
which allows the power to be cut off can be easily operated, as the
main switch of the device is not directly accessible.
Maintenance warnings
Carry out the periodic maintenance regularly (see section on
Maintenance).
Do not wash the device with water, liquid detergents or chemical
substances. Use a slightly moist, non-abrasive cloth for cleaning.
The device must be disconnected from all power sources before
undergoing any maintenance or cleaning, and before being moved.
Read the chapter ‘Maintenance’ carefully before calling the service
centre. Whatever the problem, only specialised service personnel
authorised to work with
security
equipment should be called.
Any damaged parts of the device should be replaced by original
components only.
Important advice regarding any batteries incorporated in the device.
- When replacing: use
OEM
spare parts or batteries with equivalent
electrical/mechanical characteristics.
- Do not open batteries: they may contain a small quantity of potentially
dangerous substances.
- Do not short-circuit the contacts: serious risk of burning and
breakage!
- Do not dispose of battery in fire: danger of explosion!
Any maintenance or repair involving the device being opened while
powered should be avoided as far as possible: if this becomes
inevitable, the operation must be carried out only by qualified personnel
who are fully aware of the risks involved.
Disposal warnings
Disposal of parts with environmental impact: follow the regulations in
force in the country where the device is being used.
Important advice regarding any batteries incorporated in the
device
. When replacing: use
OEM
spare parts or batteries with
equivalent electrical/mechanical characteristics. Do not dispose of
used batteries in general rubbish bins; use public battery collection
facilities as per local regulations, or return them to a
Turnstiles.us
. If
the equipment is to be disposed of, remove the batteries and dispose
of them separately.
Harmlessness to Magnetic Media
The device is safe for items carried by people including all common
magnetic media such as magnetic cards floppy disks and tapes
(conforming to NIST - NBS 500-101 ‘Care and Handling of Computer
Magnetic Storage Media’).
Warranty conditions
The warranty on all products, extended to the period agreed with the Sales
Department, is applicable to goods supplied from our factory, and for every
constituent part thereof, with the exception of the batteries and the card
reader. Any form of tampering with the device, and in
particular opening its container, is strictly forbidden and will invalidate the
warranty.
Symbols
The device is marked with this symbol whenever the operator or the maintenance personnel, in order to avoid possible
damage, have to refer to the present manual. The same symbol appears in the booklet at points where warnings or
particularly important instructions are given - instructions that are vital to a safe and correct use of the device.
The device is marked with this symbol in those areas where a dangerous amount of voltage is present. Only specialised
maintenance personnel should make adjustments in these areas.
This sign in the manual indicates tips for optimising the device’s performance.
This symbol printed on the packaging identifies operations that can be properly carried out after reading the related section
of the present manual.
Acronyms used in this document
MD
Metal Detector
FAT
Factory Acceptance Test Report: verification of the equipment compliance to the customer requirements at the end of the
manufacturing process
Revisions
Code
Firmware
Version
Date
Author
Reference
Changes
FI060K0092v1000 DF1B1000
2014-04-30 DTP-BC -
First
edition
FI060K0092v1100 DF1B1000
2014-09-19 DTP-BC -
Added parameters LBI, EN, RAV, RAT; OTS executable at user level,
according to UP setting.
FI060K0092v1110 DF1B1000;
DF1B1100 2014-12-05 DTP-BC -
Panel models: assembly of options. Spare parts codes. Software codes.
FI060K0092v1200 DF1B1000;
DF1B1100 2014-12-21 DTP-BC -
Description
of
protection degrees. Notes for stabilizing plates. Battery
operation time.
303-670-1099
