ORIGINAL
Page 4
Following accessories are available:
•
Slide sheet
•
Turning sheet
•
Foot control
•
Transport and mounting trolley
•
Siderail bumpers
•
Transport bags
TurnAid T4 is an accessory for mounting on care beds. It combines two well-known basic
functions
–
bed rail and electric turning system.
The turning system operates two motors, one on each side of the bed, to drive a turning sheet
to move a patient in bed. With a hand control the nursing staff controls the motor rolls.
The turning sheet is attached to each motor roller with Velcro-strips.
A slide sheet is placed on the bed’s mattres
s. To fix this sheet to the mattress you apply 4 elastic
bands in the sheet corners and to the movable parts of the lying surface you apply 4 Velcro
strips.
TurnAid T4 has three settings:
"bed rail-position
"
"working-position"
"folded position"
The TurnAid is adjusted between the settings by unlocking the release handles. Any alteration
between settings is only possible with two hands.
Purpose:
•
To provide a gentle and dignified handling of a patient.
•
To create a care environment with reduced stress and discomfort.
•
The bed/side rails ensure safe environment for the patient and the nursing staff.
•
To assist the nursing staff with heavy turns and transfers.
Explanation of Pictograms
Pictogram
Denomination
Description
⚠
Warning
This warning sign calls for your special attention.
CE mark
The mark shows that the product complies with CE requirements.
Declaration of Conformity to be found later in the manual
👉
IMPORTANT
Note especially!
v
Level of sealing
Level of sealing IPX0 => No protection against water destroying
the device. Not suitable for outdoor use.
