ORIGINAL
page 33
Slightly elevate the lying
surfaces of the bed and with
the Velcro straps attach the
slide sheet to the parts of the
lying surface. Make sure not
to fasten the straps to the
bed itself - only to the
movable parts of the lying
surface.
Fix the turning sheet (cf.
chapter
6.13.2.). Fold the motor roll
upwards. Place the sheet on
the bed with the Velcro side
facing down. Start at the top
end of the bed and attach the
sheet to the roll in one long
sliding movement.
Tighten the sheet on the roll
and attach the sheet in the
same way on the opposite
roll.
Straighten any creases by
tightening the sheet
forwards and backwards
between the rolls. If needed
guide the sheet by hand.
Loosen the sheet allowing the
center mark of the sheet to be
in the middle of the mattress.
Congratulations!
You have now completed
the correct installation
and ensured a safe use of
TurnAid T4
