ORIGINAL
Page 12
4.
The sheet must be mounted so it goes from the top of the mattress to the top of the rolls.
Make sure, when operating the rolls that direction and side correspond to the symbols on
hand control.
5.
Electric parts to be mounted with
red
roll to
red
input and
green
roll to
green
input. Make
sure there is nothing underneath, above or close to the system which can restrict its
movement, e.g. furniture, window seats, or storage boxes.
6.
Avoid that the power cable being damaged in moving parts. Ensure that the bed,
upon which TurnAid T4 is mounted, does not have any cables which could be
damaged by the TurnAid T4.
7.
No cables or other equipment to be squeezed or damaged in any other way when
TurnAid T4 is in use.
8.
Visually make sure that TurnAid T4 is without damage.
9.
The turning sheet is in good condition and goes correctly on the motor rolls.
10.
The slide sheet is in good condition and correctly mounted.
11.
When connecting the system to the power supply, the function of the hand control(s)
system is correct.
12.
The quick guide for use of the system is visible close to the bed and is clean and
undamaged.
