For your safety
General safety notes
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | [email protected] | www.turck.com
V02.00 | 2022/08 | 7
3
For your safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1
Intended use
The compact flow sensors in the FS100 product series are used to monitor flow speeds. Typical
applications include monitoring cooling circuits (e.g. in welding applications) and protecting
pumps from running dry. Based on the calorimetric principle, the devices can also be used to
measure the media temperature.
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2
Obvious misuse
n
The devices are not safety components and must not be used for personal or property pro-
tection.
3.3
General safety notes
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international regu-
lations, standards and laws.
n
The device meets the EMC requirements for industrial areas. When used in residential areas,
take measures to avoid radio interference.
