3
Put Inner Pot into Electric Cooker
Dry the inner pot and confirm there are no impurities on the heater.
Put the inner pot in the electric cooker and then turn the inner pot
around to allow the pot to be in full contact with the heater. Don’t
fill water in the outer pot for avoidance of any failure or electric shock.
Other Instructions
1.
Press the upper lid firmly for avoidance of poor cooking and heat insulation
performance caused by poor sealing.
2.
After the inner pot is put inside the electric cooker, turn it around for full contact
with the heater. Before selecting a working mode for cooking, please confirm that
the inner pot with food is well placed inside the outer pot. (When the inner pot is
not put in or not well placed, it is not allowed to start cooking for avoidance of any
accident.
3.
For heat insulation, do not put the spoon into the pot for avoidance of poor heat
insulation effect.
4.
If there is any corrosion caused by the deformed or damaged inner pot surface,
please replace it with our appropriate pot. The inner pot is treated with
non-adhesive coating, so it is not allowed to use hard or metal spoons or brush.
5.
For any failure caused by falling or impact from outside force, please check it for
use.
6.
If you want to cancel the working mode you choose or stop cooking, you can press
“Cancel” key during heat insulation to choose another working mode.
7.
After use of the electric cooker, cleaning should be done for next time. Use a piece
of soft cloth together with some cleaner to clean the inner pot and accessories,
then use water to wash them. (All the removable parts can be clean by dishwasher
as well). For inside and outside part of the cooker, especially the inner lid and the
sealing silicone, regular cleaning is necessary, but do remember not to use water to
wash it.
8.
If you don’t use this product for a long time, just pull down the power plug and
store it a in proper place after confirming that the cooker body is fully dry.
