50
• Avoid dropping the phone or battery. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage, take it to a service
center for inspection.
• Improper battery use may result in a fire, explosion or other hazard.
• Keep the Headset Jack and USB/Charging Port clean and dry when inserting a
connector or the USB cable.
• The phone shall only be connected to CTIA certified adapters, products that bear
the USB-IF logo or products that have completed the USB-IF compliance
program.
• This product is intended to be supplied by the Listed Power Adapter source. If
you need further assistance with purchasing the power source, please contact
Q1, LLC for further information.
• Use the included SIM/SD tool to remove the SIM card or a microSD card (sold
separately). Do not use a paper clip or any other object to remove.
• STOP using your device’s battery if its case appears damaged, swollen, or
compromised. Examples include, but are not limited to leaking, odors, dents,
corrosion, rust, cracks, swelling, melting, and scratches.
• Always handle your mobile phone with care and keep it in a clean and dust-free
place.
• DO NOT paint your mobile phone.
• Promptly dispose of used batteries in accordance with local regulations. Your
mobile phone should not be disposed of in a municipal waste. Please check your
local and state regulations for disposal of electronic products.
Safety information for FCC RF exposure
Warning! Read this information before using
Cautions
In August 1996 the Federal Communications Commission (FCC) of the United States
with its action in Report and Order FCC 96-326 adopted an updated safety standard
for human exposure to radio frequency electromagnetic energy emitted by FCC
regulated transmitters. Those guidelines are consistent with the safety standard
previously set by both U.S. and international standards bodies. The design of this
phone complies with the FCC guidelines and these international standards.
Body-worn operation
This device was tested for typical body-worn operations with the back of the phone
kept 1 cm from the body. To maintain compliance requirements, use only belt-clips,
holsters or similar accessories that maintain a 1 cm separation distance between the
user’s body and the back of the phone, including the antenna. The use of belt-clips,
holsters and similar accessories should not contain metallic components in its
