NOTICE OF AUTHORIZATION TO APPLY THE UL MARK
This is an electronically generated letter. Signatures are not required for this document to be valid.
Page 1 of 2
08/21/2009
Turbochef Technologies Inc
Mr. James Pool III
Suite 105
4240 International Pky
Carrollton Tx 75007, Us
Our Reference:
File E319600, Vol. 1
Project Number
09NK09276
Your Reference:
James K. Pool 6/9/09
Project Scope:
E319600, Listing Evaluation of Grease-Laden Emission From the Model HHC2020 Conveyor
Oven.
Dear Mr. James Pool III:
UL's investigation of your product(s) has been completed under the above Reference Number and the product was
determined to comply with the applicable requirements.
This letter temporarily supplements the UL Follow-Up Services Procedure and serves as authorization to apply the UL
Mark only at authorized factories under UL's Follow-Up Service Program.
To provide the manufacturer with the intended authorization to use the UL Mark, the addressee must send a copy of this
notice to each manufacturing location currently authorized in File E319600, Vol. 1.
This authorization is effective from the date of this Notice and only for products at the indicated manufacturing locations.
Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the near
future.
This letter authorizes application of the UL Mark for 90 days from the date of this letter.
Products that bear the UL Mark shall be identical to those that were evaluated by UL and found to comply
with UL’s requirements. If changes in construction are discovered, appropriate action will be taken for
products not in conformance with UL’s requirements and continued use of the UL Mark may be withdrawn.
UL may elect to withdraw use of the UL Mark if the Applicant or Manufacturer fails to comply with UL’s
requirements including ongoing compliance of the product, under UL’s Follow-Up Service.
Page 3.1
Manufacturer's Note: Section 3 constitutes
UL KNLZ approval for pizzas
