U s e A n d M a i n t e n a n c e I n s t r u c t i o n s
C h a r g e D i s p l a c e m e n t P r o b e E 9 T r b F o r D u s t C o n t r o l
1 6
T U R B O s . r . l .
D u s t F i l t e r C o m p o n e n t s
V i a P o 3 3 / 3 5 2 0 8 1 1 C e s a n o M a d e r n o ( M B ) I t a l y T e l + + 3 9 0 3 6 2 5 7 4 0 2 4 F a x + + 3 9 0 3 6 2 5 7 4 0 9 2
I n M n 2 5 S T S C
R e v . 0 0 e n
Maintenance
Periodically, depending on the type of plant and therefore the type of expulsions,
both as a quantity that as size (wet material, sticky, etc.). Verify the status of
the stylus / electrode of the probe, if there are accumulations of dirt and / or
condensation between the electrode and the metal mount (nipple) to the
container, which could offset measurements.
Perform at least one inspection every 4-6 months.
Emissions of oily fumes make the dust stick to the sensitive rod, this it alters
changes the reading of the probe and forces more frequent cleaning operations.
Warnings
The use of the probe is allowed only in modes described in this manual
Follow the instructions in this manual literally before installation or servicing
The installation and maintenance of the probe should be performed only by
qualified personnel
