Installation Instructions for Models BTE2614BLP/NG, BTE3212BLP/NG & BTE3812BLP/NG
CAUTION
: Even though it is possible for one person to install this grill, it is better to obtain assistance from
another person when handling the large, heavy pieces.
1
Install Grill Head
With the help of your assistant, lift the grill head and place it into the cutout of your island (See Diagram).
The island shown in the diagram is for illustration purpose only. It is not in scale.
15
The left cabinet is for a gas
tank
Install Transformer. Connect the Transformer to Power Source.
2
Install the transformer bracket onto the underside of the right bowl panel using 2 Pan Head Screws
3/16"x3/8" and tighten securely (
See Fig.1
).
Attach transformer to the transformer bracket by inserting the four stud bolts on the transformer into the
four key holes on the transformer bracket. Press the transformer downward until it rests firmly in place.
(
See Fig. 2
)
Insert the transformer-plug into the transformer-socket and tighten securely. (
See Fig.3
)
Depending on your island construction, you may need to make one hole on your island rear panel. Then
pull the transformer cord out through the hole and plug it into a properly grounded 120V AC outlet.
Note
:
In case nature gas from the house is used, please continue to step 3. If the gas tank is used,
please skip step 3 and go directly to step 4.
Pan Head Screw
3/16"x3/8"
Qty. 2
Part # S182G03061
Transformer
plug
Fig. 1
Fig. 2
Fig. 3
Wire
Transformer
socket
AC-plug
Transformer Bracket
NOTE:
The grill head you purchased is to be installed on the island which is not included in this purchase. You
either need to purchase a prebuilt island or you have to build your own island. Before building your grill island,
please read the construction guidelines and clearances in
Fig.6
and on
pages 16 & 17
carefully.
Right Bowl
Panel
