17
5
Install Partition Panel
Ignitor Cap
Ignitor Slot
AA Battery
Spring
Install Ignitor Battery
Remove Ignitor Cap from Control Panel.
Place supplied AA battery into the Ignitor Slot with positive pole facing you.
Install the Cap and Spring over the AA battery and tighten securely.
6
Partition Panel
(above the Gas Tank)
Fig. 6
Tank Tray Set
5"
22-24"
21"
1"
17-19"
5"
Vent Openings must
be at least 1/8" wide
The gas grill is designed for use with a maximum of 20 lb tank. As per standard, a partition
panel (not included) or equivalent device is required to be installed in the left cabinet of the island
for preventing the use of 30 lb tank.
Note:
Make sure there is 22~24" of clearance between the partition panel and tank tray set. The
space around the gas tank is not greater than 12".
5"
+
-