NO OTHER
CONTROL UNITS!
SmartController
7000
6
H
ig
h T
ec
h A
qu
ar
iu
m
Ec
ol
og
y
Wall mounting of the
SmartController
The SmartController 7000 can be mounted to smooth walls
with the supplied adhesive strips, or be screwed to the wall.
(Screws not included in the scope of delivery!)
A suitable wall must be dry and protected from splash water
and moisture.
The SmartController 7000 may under no circumstances be
attached above the Aquarium (4)!
Water from a pump connected to the SmartController 7000
could follow the cable and damage the device. To avoid this,
we recommend forming a loop with the cable or placing the
SmartController 7000 higher than the pump.
Observe the cable length of the devices because connecting
cables may not be extended.
Several TUNZE
®
controllers can be placed densely side by
side, and all cable outlets positioned at the bottom (5).
Route the cables in such a manner that no water can travel
along them and penetrate into the controller!
Safety instructions
for TUNZE
®
power
supply units
TUNZE
®
power supply units have not been designed for
outdoor operation (1).
In order to prevent water damage, the power supply unit should be
placed as far away from the aquarium as possible.
Operation is permitted only with a residual-current-operated
circuit-breaker fitted, max. 30 mA.
Before working in the aquarium, please make sure that all electric
units in use have been disconnected from the mains.
Do not repair a damaged mains cable – replace the unit
completely.
The connection to devices, such as electronic switches or
speed controllers, of other makes is not permissible (2)!
The SmartController 7000 on the pump cable is susceptible to
water and may be destroyed in case of water damage!
The operation of the SmartController 7000 is permissible only
with the original TUNZE
®
power supply unit.
Mount the power supply unit in a dry and well-ventilated
position only.
Do not mount in the vicinity of heat sources (3).
Ambient temperature during operation: 0°C to +35°C (32°C
to 95° F)
Ambient humidity during operation: 30% - 90%
Storage temperature: -25°C to +80° Celsius (-13°F to 176°F)
Storage humidity: 30% - 95%
