1
2
3
4
interval
SmartController
7000
17
H
ig
h T
ec
h A
qu
ar
iu
m
Ec
ol
og
y
Menu “Pumps”
Interval mode —
high and low tide
simulation
The interval operation between low tide (
channels
1
-
2
) and
high tide (
channels
3
-
4
) (1) enables the creation of two
circulation currents in the aquarium (2) The reef rock is
regularly flooded from both sides, the sediments are washed
away and the invertebrates exposed to current from all
directions. We recommend setting the pump performances as
equally as possible, in order to achieve the same circulation
performance from both sides.
Connect the SmartController 7000 to the mains adapter
5012.010 as the power supply, and then connect to the power
grid (3).
Open the SmartController 7000 page in the browser and select
a language (4).
When you click on the menu item “Pumps” (5), the black
button “Pulse mode” (6) will be displayed initially during the
first opening. Click this black button and select “Interval Mode”
(6b). The pumps will now be controlled alternately, for example,
the right pump in the aquarium once and then the left pump
once. On the SmartController 7000, the
channels
1
-
2
and
channels
3
-
4
will be controlled in an alternating cycle (1).
Field “General settings”
(7):
With the “Interval mode” (6) button activated, the time between
minimum and maximum circulation performance of the pumps
(8) can be set here simultaneously for all 4 channels / pumps
with the top regulator. This will generate an efficient wave
motion simulation.
Additionally, it is possible to easily set the time frame of the
feeding break (9) and the ramp for the smooth running of all
pumps (10).
