GB
O w n e r ’ s m a n u a l
•
P u r e r u N 1 0 . 1
11
Grounding Instructions
This product must be grounded. If the
treadmill’s electrical system should
malfunction or breakdown grounding
provides a path of least resistance for
electric current, reducing the risk of
electric shock. This product is equipped
with a cord having an equipment-
grounding plug. The plug must be
plugged into an appropriate outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances.
NOTe:
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a
qualified electrician or serviceman if
you are in doubt as to whether the
product is properly grounded. Do not
modify the plug provided with the
product if it will not fit the outlet; have
a proper outlet installed by a qualified
electrician.
General Instructions
•
NEVER operate this treadmill
without reading and completely
understanding the results of any
operational change you request from
the computer.
•
Understand that changes in speed
and incline do not occur immediately.
Set your desired speed on the
computer console and release the
adjustment key. The computer will
obey the command gradually.
•
NEVER use your treadmill during an
electrical storm. Surges may occur
in your household power supply that
could damage treadmill components.
•
Use caution while participating in
other activities while walking on your
treadmill; such as watching television,
reading, etc. These distractions may
cause you to lose balance or stray
authorized under the laws of the
country in question to carry out
maintenance and repair work.
•
Never drop or insert any object into
any openings.
• Do not use outdoors.
• Do not use excessive pressure
on console control keys. They are
precision set to properly function with
little finger pressure. Pushing harder
is not going to make the unit go faster
or slower. If you feel the buttons are
not functioning properly with normal
pressure, contact your dealer.
SAVe THIS INSTruCTION MANuAL
Important electrical Information
NOTe:
NEVER use a RCD - Residual Current
Device (U.S. ver.= GFCI) - wall outlet
with this treadmill. As with any
appliance with a large motor, the RCD/
GFCI will trip often. Route the power
mains cord away from any moving part
of the treadmill including the elevation
mechanism and transport wheels.
NOTe:
NEVER remove any cover without first
disconnecting AC power. If voltage
varies by ten percent (10%) or more,
the performance of your treadmill may
be affected. Such conditions are not
covered under your warranty. If you
suspect the voltage is low, contact your
local power company or a licensed
electrician for proper testing.
NOTe:
NEVER expose this treadmill to rain or
moisture. This product is NOT
designed for use outdoors, near a pool
or spa, or in any other high humidity
environment. The temperature
specification is 40 degrees c, and
humidity is 95%, non condensing (no
water drops forming on surfaces)
.
Summary of Contents for pure run 10.1
