2
OWNER’S MANUAL
•
PURE RUN 1.1
OWNER’S MANUAL
•
PURE RUN 1.1
ASSEMBLY
As for the assembly of the device, we
recommend two grown-up persons. Do
not take the treadmill out of the box: use
the packing material to cover the floor on
the assembly site.
Before assembling the device, insure all
parts are present:
1.
Frame
2.
Power cord
3.
Assembly kit
NOTE:
keep the assembly tools, as you
may need them e.g. for adjusting the
equipment.
The directions left, right, front and back
are defined as seen from the exercising
position. In case of problems contact
your Tunturi dealer.
STEP 1:
To avoid injury, you must fold up the
deck prior to lifting the treadmill out of
the box.
Locate the hardware bag and parts that
are listed in the chart.
part # description
Q’ty
A
main frame incl.
user interface
1
B
Screw (M8x20L)
8
C
Screw (M4x8L)
4
D
Washer (Ø8xØ19x1.5)
2
E
Washer (Ø8xØ18x1.5
4
F
Screwdriver
1
G
Allen key
1
H
Lube
1
I
Base side cap
2
J
Washer (Ø10xØ25x1.5)
2
STEP 2
Lift up the upright, then place the screws
(B) and washers (D, E) inside holes at
the bottom of the upright. Use the allen
key (G) to tighten them well.
• The device must not be used by
persons weighing over 135 kg (300
lbs).
• Always insert the safety key and
attach the clip to your clothing at your
waist before beginning your workout.
If you should encounter problems
and need to stop the motor quickly,
simply pull on the cord to disengage
the safety key from the console. To
continue operation, simply reinsert
the safety key into the console
• Remove the safety key and store
it away in a safe place when the
treadmill is not in use. Keep the
safety key away from children.
•
SAVE THESE INSTRUCTIONS!