Tunturi Pure ROW 8.1, Owner'S Manual

Page: 22 / 28

EN
22 ROW 8.1
Re-attaching the rowing belt
1. Begin re-attaching by guiding the ro-
ro- ro-
ro-
wer belt wer belt wer belt wer belt around the rower belt pulley. rower belt pulley. rower belt pulley. rower belt pulley.
2. The velcro side should be facing up-
ward as illustrated.
3. Next, guide the belt around the idle idle idle idle
wheel wheel wheel wheel as shown.
4. Once around the idle wheel, attach
the rower belt to the belt / bungee belt / bungee belt / bungee belt / bungee
pulley pulley pulley pulley. There is an obvious “lip” at
the attachment point.
5. Wind the rower belt
rower belt rower belt
rower belt onto the belt /
belt / belt /
belt /
bungee pulley bungee pulley bungee pulley bungee pulley until the rower handle rower handle rower handle rower handle
is at its furthest forward position.
6. Rethread the bungee cord bungee cord bungee cord bungee cord
(on opposite side of the idle wheel)
back through the bungee pulleys
bungee pulleys bungee pulleys bungee pulleys
(see previous page)
and tie off at the attachment point attachment point attachment point attachment point.
7. See next page for bungee cord route bungee cord route bungee cord route bungee cord route.