Tunturi Pure ROW 8.1, Owner'S Manual

Page: 10 / 28

EN
10 ROW 8.1
Installation part 1 - Mounting instructions rear end
1 Install the rower seat (3) rower seat (3) rower seat (3) rower seat (3) onto the seat rail seat rail seat rail seat rail
(2) (2) (2) (2) as shown.
NOTE
NOTE NOTE
NOTE
⇒
The rail rear end has two
mounting holes.
2 For the next assembly step, you will need:
•
rear leg (11) rear leg (11) rear leg (11) rear leg (11),
•
2x rear seat rail bumpstops (9)
rear seat rail bumpstops (9) rear seat rail bumpstops (9)
rear seat rail bumpstops (9),
•
2x rear leg bolts (M10x120mm) (13) rear leg bolts (M10x120mm) (13) rear leg bolts (M10x120mm) (13) rear leg bolts (M10x120mm) (13),
•
2x washer (5) washer (5) washer (5) washer (5),
•
seat rail bracket (12) seat rail bracket (12) seat rail bracket (12) seat rail bracket (12),
•
rubber end cap (10),
rubber end cap (10), rubber end cap (10),
rubber end cap (10),
•
internal seat rail bracket (22) internal seat rail bracket (22) internal seat rail bracket (22) internal seat rail bracket (22)
3 With the seat already installed on the rail,
thread the rear rubber bumpstops (9)
rear rubber bumpstops (9) rear rubber bumpstops (9)
rear rubber bumpstops (9) onto
the end of the seat rail (2) as shown.
CAUTION
CAUTION CAUTION
CAUTION
⇒
Assemble the equipment in the given order.