Tunturi Platinum PRO 5.0, User Manual

Page: 25 / 112

2 5
English
To stop the equipment:
- Set the mains power switch to the off position.
- Remove the mains plug from the wall socket.
- Remove the mains plug from the equipment.
Safety key (FIG. E-1)
The equipment is equipped with a safety key that
must be properly inserted into the console to start
the equipment. If you remove the safety key from the
console, the equipment will stop immediately.
- Insert the safety key into the slot in the console.
- Make sure that the clip of the safety key is properly
attached to your clothing.
Make sure that the clip is not removed from your
clothing before the safety key is removed from the
console.
Circuit breaker (FIG. E-2)
The equipment is equipped with a circuit breaker that
interrupts the circuit when the electricity load is above
the maximum capacity. When this occurs, the circuit
breaker must be pressed.
WARNING
• Before pressing the circuit breaker, remove the
mains plug from the equipment.
If the equipment shuts down, proceed as follows to
restart the equipment:
- Remove the mains plug from the equipment.
- Press the circuit breaker to restart the equipment.
- Insert the mains plug into the equipment.
Console
(FIG. F)
CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered
with drops of sweat.
• Do not lean on the console.
NOTE
• The console switches to standby mode when
the equipment is not used for 4 minutes. If the
console is in standby mode, the display shows
the room temperature
Jog wheel and Buttons
Back, Stop button:
- Move back to previous window
- Stop the active training
User/Settings:
- Press this button to enter User/Setting mode screen
- This button is of no use during workout
Speed +
Increases the speed(0.5 to 22Kph).
Pressing once increases the speed 0.1 kph.
Pressing and holding for two seconds will increase the
speed faster.
Speed -:
Decreases the speed(0.5 to 22Kph).
Pressing once decreases the speed 0.1 kph.
Pressing and holding for two seconds will decrease the
speed faster.
I
Increases the incline (0% to 12% ±1%).
This button is also used to scroll the programs.
This button is also used to scroll the programs.
Incline -:
Decreases the incline(0% to 12% ± 1%).
This button is also used to scroll the programs.
This button is also used to scroll the programs.
Jog wheel: (FIG. E-03)
Turn functions:
- Choose workout mode in main menu
- User/setting mode option selection
- Choose working item on the setting screen
- Increase or decrease the setting value
- Adjusting target value (high/low) during workout
Horizontal
Turning clockwise to choose option rightward;
counterclockwise for leftward.
Vertical
Turning clockwise to shift up; counterclockwise to shift
down.
Press functions:
- Sport mode confirmation
- Option confirmation under User/Setting mode
- Confirmation of working item on setting screen
- Setting value confirmation
- Screen switching between bpm / incline Profile
- Screen switching between Video / Profile during
T-Road
Safety Key (FIG. E-1)
A safety key is provided with this unit. It is a simple
magnetic design that should be used at all times. It is
for your safety should you fall or move too far back on
the running belt.
Pulling this safety key will stop running belt movement.