ConnectMe Tunstall Vi+ Installation and Programming Manual
34
Saving Unit templates.
Up to four configuration “templates” of customised settings can be stored in
the keypad’s memory for subsequent programming to other home units.
This function must be used with care. Specific settings such as unit ID, radio
trigger assignments/configurations, personal recipient/auto-answer numbers
etc. must be individually configured after any template is applied.
Only settings able to be configured by service providers and which have been
changed from their default values are stored/overwritten, though radio
peripheral and unit identities are unaffected. A stored template should only be
applied to home units of the same model and release level as the unit from
which it was read otherwise a warning will be given and the process halted.
Save a template into the keypads memory from the home unit
Press
followed by the destination template location the settings are going
to be stored in (
-
), which must be held for 3 seconds, then followed by
the
key.
Write Template from the keypad to the home unit
Press the
key followed by the source template (
-
) key, which
must be held for 3 seconds, then followed by the
key.
List Stored Templates
It is possible to list the stored templates and their associated software version.
Press the
key followed by
to display the information.
Delete Template from Keypad
To delete a template press
followed by the source template (
-
)
key, which must be held for 3 seconds, then press the
key.
