ID-Lock Smart Installation guide - Ver. 1.3
19
Step 15
Spray a little lithium grease on the threaded end of the
main spindle
and inside the
outer
wire sleeve
.
Step 16
Now press the
outer wire sleeve
toward the door and, while holding it depressed, turn the
cogwheel that protrudes from the bottom of the
top cabinet
assembly clockwise. Then,
without letting go of the cogwheel, release the pressure of the
outer wire sleeve
and then
let go of the cogwheel. Now the
outer wire sleeve
should stay retracted, allowing you access
to the threaded part of the
main spindle
.
