Fig. 12. Machine ready for transport in longitudinal position.
3.3.3. Changing the machine from transport position to working order CK-4000C
-
Lower the left end of the machine to ground and the draw pint gets loose from the draw link
-
Remove the draw triangle from the tractor
-
Fasten the crossbar to the tractor’s lower links
-
Mount the drill to the tractor as described above
-
Lift the machine
-
Lift the transport wheels and pull from the locking pin of the lower fastening point
simultaneously. When the locking opens lower the wheels and detach them from the
machine.
4.
MARKERS
a.
General description
CK-4000C is equipped with hydraulic middle markers which considerably facilitate the sowing.
We recommend the markers for the CK-3000B model, as well.
The machines can also be fitted with wheel track markers. The main components of the marker
equipment are a changer and markers. The changer is operated hydraulically. Normally the changer
cylinder is to be connected to the tractor’s single acting outlet. The changer is operated
semiautomatically. It is possible to connect the changer cylinder in parallel with the tractor’s own
lifting cylinder. The hydraulic changer can be operated automatically. The changer operated every
time the machine is lifted.
b.
Adjusting the changer
The hydraulic hose of the changer has a flow regulating valve which is used to regulate the lifting
and lowering speed of the arm. When turning the screw clockwise the movement gets slower.
When turning anticlockwise the movement gets faster. Fig. 14 a.
