12
DOOR SENSOR
The door sensor is a new feature of the Pellet 3D Printer If the door is suddenly opened while the machine is printing,
the printer will pause the printing to avoid any alterations or damages that may occur. When the door is correctly
closed, the printing process will start again from where it was left.
The moment the door is opened you will received a notification on Repetier Server. In this window you will be able to
disable its use. The moment the door is closed, the notification tab will close too. Such as the filament sensor, the door
sensor can be turned on and off from Repetier Server. To turn it on, please follow these easy steps:
A red light will appear on the sensor if the door is closed. If it does not work, you have to verify if the magnet that detects
the opening is in its correct position. If the magnet is in its position and the light keeps off, the sensor must be replaced.
IMPORTANT NOTE
Desactivado
Activado
ACTIVATE DOOR SENSOR
1. Open Temperature Control on Repetier Server
2. Press “Advanced Options”
3. Press “Activate door sensor”